Support

FAQs

Assembly and Connection Fujitsu UART

Connection

Aidoo Fujitsu UART Wi-Fi controller

The Fujitsu unit controller must remain working in parallel with your Aidoo.

Perform all of the connections with a total absence of power.

Follow these steps to connect them:

  1. Fix your Aidoo close to the AC unit to be controlled using the material supplied (double-sided adhesive tape or screws).

    Important: Check that you have a Wi-Fi signal available before fixing it.
    Assembly Aidoo

  2. Disconnect the indoor unit.
  3. Connect the Aidoo to the CN65 terminal of the indoor unit using the supplied cable.
    Connection Aidoo FU2
  4. Power the indoor unit. Check the LED:
    green (blinking)
    red (solid)
3303
All FAQs